Power Exterior Mirrors (If Equipped)
|WARNING: Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death.|
- Select the mirror you want to adjust. The control lights.
- Use the adjustment control to adjust the position of the mirror.
- Press the mirror control again. The control light turns off.
Fold-Away Exterior Mirrors
Push the mirror toward the door window glass. Make sure that you fully engage the mirror in its support when returning it to its original position.
Telescoping Mirrors (If Equipped)
This feature lets you extend the mirror about 75 mm. It is useful when towing a trailer. You can manually pull out or push in the mirrors to the desired position.
Power-Folding Mirrors (If Equipped)To fold both mirrors, switch your vehicle on (with the ignition in accessory mode or the engine running) and then:
- Press the control.
- Press control again to unfold the mirrors.
Note: Do not stop the mirrors midway through their movement. Wait until the mirrors stop moving and press the control again.The left-hand and right-hand mirrors move at different rates. For example, one mirror may stop while the other one continues to move. This is normal. Moving the mirrors 10 or more times within one minute, or repeated folding and unfolding of the mirrors while holding the control down during full travel, may disable the system to protect the motors from overheating. Wait approximately three minutes with the vehicle running, and up to 10 minutes with the vehicle off, for the system to reset and for function to return to normal.
Loose MirrorIf your power-folding mirrors are manually folded, they may not work properly even after you re-position them. You need to reset them if:
- The mirrors vibrate when you drive.
- The mirrors feel loose.
- The mirrors do not stay in the folded or unfolded position.
- One of the mirrors is not in its normal driving position.
To reset the power-fold feature, use the power-folding mirror control to fold and unfold the mirrors. You may hear a loud noise as you reset the power-folding mirrors. This sound is normal. Repeat this process as needed each time the mirrors are manually folded.
PowerScope™ Power Telescoping Mirrors (If Equipped)
This feature lets you position both mirrors at the same time.To adjust your mirrors, make sure you switch your vehicle on (with the ignition in accessory mode or the engine running) and then:
- Press and release the control. It lights.
- Press the adjustment control to position the mirrors. Press the left arrow to extend the mirrors out. Press the right arrow to retract the mirrors in. Press the up or down arrow to fold the mirrors toward the window glass. Press the up or down arrow again to fold the mirrors out.
Note: Moving the mirrors 10 or more times within one minute, or repeated folding and unfolding of the mirrors while holding the control down during full travel, may disable the system to protect the motors from overheating. Wait approximately three minutes with the vehicle running, and up to 10 minutes with the vehicle off, for the system to reset and for function to return to normal.
Heated Exterior Mirrors (If Equipped)
See Heated Windows and Mirrors .
Memory Mirrors (If Equipped)
You can save and recall the mirror positions through the memory function. See Memory Function.
Auto-dimming Feature (If Equipped)
The driver exterior mirror automatically dims when the interior auto-dimming mirror turns on.
Direction Indicator Mirrors (If Equipped)
While the vehicle is running, the forward-facing portion of the appropriate mirror housing blinks when you switch on the direction indicator.
Puddle Lamps (If Equipped)
The lamps on the bottom part of the mirror housing light when you use your transmitter to unlock the doors or when you open a door.
Clearance Lamps (If Equipped)
The lower, outer part of the mirror housings light when you switch the headlamps or parking lamps on.
Spot Lamps (If Equipped)
The area lights are on the forward-facing portion of the mirror housing. You can switch them on and off by using the controls located on the instrument panel. See Lighting .
360-Degree Camera (If Equipped)
Each mirror includes a camera.
Integrated Blind Spot Mirror (If Equipped)
|WARNING: Objects in the mirror are closer than they appear.|
Blind spot mirrors have an integrated convex mirror built into the upper outboard corner of the exterior mirrors.They can assist you by increasing visibility along the side of your vehicle. The blind spot mirror is only on the driver exterior mirror.
Check the main mirror first before a lane change, then check the blind spot mirror. If no vehicles are present in the blind spot mirror and the traffic in the adjacent lane is at a safe distance, signal that you are going to change lanes. Glance over your shoulder to verify traffic is clear, and carefully change lanes.
The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A). The image transitions from the main mirror and begins to appear in the blind spot mirror as the vehicle approaches (B). The vehicle transitions to your peripheral field of view as it leaves the blind spot mirror (C).
Blind Spot Information System (If Equipped)